It is fully compatible with many (and more to come) electrical systems in vehicles, such as:
- CAN-BUS system
- Dual Function Lamps (lateral/fog or lateral/stop), sending the signal correctly to the lamps of the trailer or caravan hitch.
- Design and Development Capability Check Control System: Fault detection of SFL lamps
- Mass-activated lamps in cars such as Jaguar S-Type or Chrysler Voyager
Our kits come in two versions for 7- or 13-pin plugs:
As a general guide, 7-pole socket kits are used by default for trailers, where installation is simple and does not require a direct +12V supply.
13-pin socket kits are used in more complex cases, such as caravans, where additional lines are required for the system and constant voltage is needed. It also incorporates the reverse light function. Not sure which one to choose? Please don't hesitate to contact us to help.
We also carry out additional functions on request in our kits, such as the C2 control system, which is an acoustic warning of bulb failure. In Germany, Austria and the United Kingdom, it is mandatory for the driver to be notified either by a visual or audible signal that the indicators are working properly.
As a general guide, 7-pole socket kits are used by default for trailers, where installation is simple and does not require a direct +12V supply.
13-pin socket kits are used in more complex cases, such as caravans, where additional lines are required for the system and constant voltage is needed. It also incorporates the reverse light function. Not sure which one to choose? Please don't hesitate to contact us to help.
We also carry out additional functions on request in our kits, such as the C2 control system, which is an acoustic warning of bulb failure. In Germany, Austria and the United Kingdom, it is mandatory for the driver to be notified either by a visual or audible signal that the indicators are working properly.
